Bounce flash photography is the use of an external flash unit (also known as hot shoe-mounted flash) to reflect the appropriate amount of light onto your subject so that your shot appears bright and sharp.
The Speedlite has a rotatable head that can be adjusted to face a wall or ceiling. When the flash is triggered, light is reflected off those surfaces, which diffuses and softens the light from the Speedlite.
Bounce flash photography is extremely useful especially for indoor photography. Read on to learn the basics as well as some techniques to photograph portraits and accessories with hot shoe-mounted flashes such as Canon’s Speedlites. (Reported by: Teppei Kohno)
Basics of bounce flash photography
A: Facing 90° upwards
B: Facing 7° downwards
C: Facing 90° left
D: Facing 90° right
The key to achieve good results in bounce photography is the bounce angle. The angles which you can adjust the flash head differs depending on the model of Speedlite being used. For the above Speedlite 600EX II-RT, the flash head can be positioned to face up, down, left or right. Varying the angles of the flash head will result in light illuminating the subject in different ways.
The Speedlite 470EX-AI features AI (Auto Intelligent Bounce), which automatically measures and sets the optimal bounce angle for natural results.
For other Speedlites, practice makes perfect. Try rotating the head of your Speedlite to change the angle of your bounce. Changing the angle which you position your Speedlite can change the final image greatly as well.
Pointing the flash head towards the ceiling or a wall creates a softer light, which is especially effective indoors where ceilings and walls are present. This reduces the glare from the skin, hair, and clothing of your subject when taking photos of people.
Tip 1: To change how shadows appear, bounce light in a different direction
There are two ways to bounce flash:
- Ceiling bounce, where you shoot with the flash head facing the ceiling, and
- Wall bounce, where the flash faces sideways towards a wall
The main difference between both is in how the shadows appear.
When a ceiling bounce is performed, light comes from above. This results to shadows appearing below the subject, making the subject look flat.
Conversely, when a wall bounce is performed, light comes from one side and casts shadows on one side of the subject. This makes your subject look more three-dimensional.
Ceiling bounce
Wall bounce
Tip 2: Take note of the colour of the ceiling/wall you are bouncing light off
Bounce flash photography works well with white ceiling and walls.
If the bounce surface is coloured, your subject will end up having a colour cast. In the example above, when the light was reflected off the brown door, the entire photo became tinged in brown, and the original colour of the subject was not reproduced accurately.
When the bounce surface is white
When the bounce surface is brown
(Same for both examples) EOS 760D/ EF-S18-55mm f/3.5-5.6 IS STM/ FL: 55mm (88mm equivalent)/ Manual exposure (f/5.6, 1/125 sec)/ ISO 100/ WB: Auto/ (Used in example: Speedlite 600EX II-RT)
Tip 3: The optimal distance from walls and ceilings is 1 to 2m
The optimal distance between the ceiling or wall and the Speedlite should be between 1 and 2 metres. Any further than 2 meters, it becomes harder for the light to reach the bounce surface, resulting in a weaker bounce effect. This produces an underexposed photo.
In the example below, the distance to the ceiling was about 4m away. This is no different from directing the flash up to the sky at an outdoor location—note how the resulting photo is rather underexposed.
1.6m from the ceiling
4m from the ceiling
(Same for both examples) EOS 760D/ EF-S18-55mm f/3.5-5.6 IS STM/ FL: 55mm (88mm equivalent)/ Manual exposure (f/5.6, 1/125 sec)/ ISO 100/ WB: Auto/ (Used in example: Speedlite 600EX II-RT)
Tip 4: Produce softer light through the use of a bounce adapter
Bounce adapter
A bounce adapter is an accessory used to scatter light. When attached onto the flash head during bounce photography, it further softens the already soft light so that the light on the subject is more even. It can also soften or eliminate the shadows on the subject. The Speedlite 600EX II-RT and Speedlite 430EX III-RT models each come equipped with their own unique bounce adapters, and they may also be purchased separately. It is, however, incompatible with the Speedlite 270EX II.
With bounce adapter
Without bounce adapter
(Same for both examples) EOS 70D/ EF24-70mm f/4L IS USM/ FL: 55mm (88mm equivalent)/ Aperture-priority AE (f/4.5, 1/25 sec)/ ISO 800/ WB: Auto/ (Used in example: Speedlite 430EX III-RT)
Bounce adapters are particularly effective for scenes where the distance from the flash head to the bounce surface is short and strong shadows are easily produced. When an adapter is used, the shadows and skin tone of the subject look more natural.
Tip 5: To add life and sparkle into a subject’s eyes, use the catchlight panel
Catchlight panel
The catchlight panel is stored inside the flash head when not in use, and is pulled out from the front when you want to use it (as shown in the red box). The panel helps to reflect light into the eyes of your subjects when taking photos of people. The Speedlite 600EX II-RT and Speedlite 430EX III-RT come with one, but not the Speedlite 270EX II.
With catchlight panel
Without catchlight panel
(Same for both examples) EOS 70D/ EF-S18-135mm f/3.5-5.6 IS STM/ FL: 42mm (67mm equivalent)/ Aperture-priority AE (f/4.5, 1/8 sec)/ ISO 1600/ WB: Auto/ (Used in example: Speedlite 430EX III-RT)
Since using bounce photography for portraits usually means pointing the flash head towards the ceiling or a wall, it can be hard to get some catchlight in your subject’s eyes. In such cases, you will want to use a catchlight panel. As the panel can reflect light into your subject’s eyes, it can make your subject look livelier and is particularly useful for shots where facial expressions are depicted clearly, such as in chest-up shots. It is especially effective when the flash head is facing 90 degrees upwards—you may not obtain the same effect if the flash head is rotated left or right.
More keen than ever to get a Speedlite or upgrade your current one? Check out the following article for a comparison of Canon’s different Speedlites:
Which Canon Speedlite Flash to Choose?
For more detailed tutorials on portrait photography with bounce flash, head to:
[Part 1] Let’s Start Bounce Flash Photography
[Part 2] Bounce Flash Photography – Change Color Using White Balance Settings
For more tips, tutorials and reviews on Speedlites and external flash photography, go to:
In Focus: Speedlite
In Focus: The Basics of External Flash Photography
Receive the latest update on photography news, tips and tricks.
Be part of the SNAPSHOT Community.
Sign Up Now!
EOS-1D X Mark II (Body)
EF24-70mm f/2.8L II USM
EF24-70mm f/4L IS USM
EF-S18-55mm f/3.5-5.6 IS STM
Teppei Kohno
Born in Tokyo in 1976, Kohno graduated with a Social Work degree from the Department of Sociology of Meiji Gakuin University, and apprenticed with photographer Masato Terauchi. He contributed to the first issue of photography magazine PHaT PHOTO and became an independent photographer after that, in 2003. The author of many books, Kohno not only shoots all sorts of commercial photographs, but also writes prolifically for camera and other magazines.
About the Author
Born in Tokyo in 1976, Kohno graduated with a Social Work degree from the Department of Sociology of Meiji Gakuin University, and apprenticed with photographer Masato Terauchi. He contributed to the first issue of photography magazine PHaT PHOTO and became an independent photographer after that, in 2003. The author of many books, Kohno not only shoots all sorts of commercial photographs, but also writes prolifically for camera and other magazines.